The car carpet might not perform important tasks like the car battery and the engine, but it plays a vital role in the automobile.
Clean carpets make your feet feel relaxed and provide an amusing odor.
Nevertheless, many folks don’t know how to clean a car carpet without a machine to make it look new.
If you fall into this class, you can rely on this guide to transform your dirty carpet into a plush paradise.
In this post, you’ll learn how to remove stains from car carpets using a DIY carpet cleaner. But first, let’s first take a look at the reasons why you need to clean your car’s carpet:
Why Do You Need to Clean the Carpets of Your Car?
The following are the most compelling reasons that you need to clean the carpets of your car after regular intervals.
- A lot of dust can be present in your car’s carpet due to continuous use. They get dust from roads, your shoes, etc. It can be hard for you to drive a vehicle with dusted mats especially if you are allergic to dust.`
- Dirty carpets can lead to a bad smell in your vehicle. You never want to cancel your driving plans due to this smell. Therefore, you need to clean the carpets.
- The main reason is that dirty carpets don’t look good in your car. They make your whole car look dirty.
Necessary Things You Will Need To Clean the Car Carpet:
These are the critical things you need to accomplish spotless carpets even without a machine.
- Broom and dustpan
- An automotive carpet cleaner solution
- Nylon brush or toothpaste
- Cloths and towels
- Spray bottle
Follow these steps to deep clean the car.
1. Remove the Carpets
The primary step for cleaning car carpets is to remove them.
This will permit you to clean easily because nothing will get in the way and prevent the dirt from spreading to other regions.
Remove them cautiously by rolling them up to inhibit the dirt from them from falling on your automobile’s interior and then lifting them out.
If you have non-removable carpets, you will have to clean them from the inside.
2. Vacuum the Carpets
The next step for how to shampoo car carpet is to vacuum them.
If you don’t have a vacuum, you can utilize a dustpan and broom to eliminate the debris from the mats.
3. Make the Carpet Cleaner For the Car
If you are going to use a shampooer for the vehicle, prepare and use them according to the manufacturer’s instructions.
Some have to be diluted first, while others come ready to use.
If you want to use a DIY mat cleaner, you will need to mix a few ingredients.
If you want to clean the mats wholly, mix 1 cup of vinegar and a little bit of dish soap in one gallon of hot water. You can tweak this according to your cleaning needs.
If you want to remove tough stains, combine a cup of hot water and ¼ cup of baking soda.
Mix a bit of paint thinner and some cornmeal or salt to remove grease stains.
Combine cold water and a bit of laundry starch to eliminate bloodstains.
4. Clean it
Spray the vinegar and dish soap solution on the carpets. Then scrub them in a circular motion to get rid of grime.
After scrubbing, blot the wetness from the mats with towels. If there is still dampness, allow them to air dry.
Don’t put them in direct sunlight, but place them in an airy location.
If the carpets are non-removable, leave the vehicle doors open to permit them to air dry.
Pro Tips to Consider When Cleaning Car Carpets
The followings are some of the top listed and most effective tips to consider when cleaning your car’s carpets.
Shampoo Them
You may not believe this, but shampoo can act better than most carpet cleaners. You can use any good quality shampoo to clean the carpets of your vehicle. The shampoo did a great job when it comes to maintaining the softness of these carpets. Several carpet cleaners can make your car’s carpet hard. However, using shampoo can solve this issue.
Focus on Stains
Your Car’s carpet must have stains on them. These stains often disappear when you wet them. These stains appear again after drying. Therefore, you need to focus on these stains so that you can clean them well when washing the mats of your car.
Use Soft Bristle Brush
Carpets may not look sensitive, but they can get damaged when you use a hard brush on them. Therefore, always use a soft bristle cleaning brush to clean your car’s carpets. Brush your car’s carpets gently. Don’t rub them so hard. It can also damage their color.
Rinse Them Properly
After shampooing your carpets, you need to rinse them with water. Rinsing them properly is required to remove all the cleaner or shampoo from them. When you don’t rinse them properly, they become hard on drying. Furthermore, their color also gets affected.
Dry Them Well
It is the main tip that you need to focus on. Most people ignore the proper cleaning of the carpets and start using them again. You need to avoid this. Make sure that you have fully dried your mat before placing them in the vehicle. When you don’t dry them well, they can become smelly. The chances of getting stains also increase.
Conclusion
Now, you know how to clean vehicle carpet without a machine; you don’t have to spend a hefty amount on a detailer.
Obviously, you can employ a professional to do it, but doing it yourself is worthwhile, and you can also save money.
If you want to keep your car in the best condition, follow CarDecent for car maintenance tips.
Last Updated on March 3, 2023 by Justina Lyn
Mac is an Automotive enthusiast. He owns up to 15 vehicles. He deals with Auto problems and shows his skill to Car owners who are seeking any type of Car help.
Baking soda tip will work fine for me.